Call 07942545947 82% Response Rate
Send Email
Minimum Order Quantity: 1 Piece
Product Brochure
| Color | Black |
| Packaging Size | 150*150*15 mm |
| Usage/Application | 3d printer machine |
| Printer Type | FDM printer |
| Input Voltage | DC 12/24V |
| Package Dimensions | 150x150x15 mm |
| Width | 150mm |
| Current | 2A |
| Weight | 50g |
| Shape | Rectangle |
| Height | 15 mm |
| Frequency | Motor driver interface: X, Y, Z1, Z2, E |
| Power | UART mode of the on-board TMC2209 |
Bigtreetech manta M4P control board running klipper with CB1 offers fully connected with their comprehensive interfaces, support filament runout detection, auto shutdown, BL touch, RGB lights…
Additional Information:
Product Brochure
| Color | Black |
| Packaging Size | 150*150*15 |
| Usage/Application | 3d printer machine |
| Printer Type | FDM printer |
| Input Voltage | DC 12/24V |
| Package Dimensions | 150*150*15 |
| Width | 150 |
| Current | 2A |
| Weight | 50G |
| Height | 15 |
| Frequency | Motor driver: UART mode of the on-board TMC2209 |
| Power | MCU: ARM Cortex-MO+ RP2040 |
Bigtreetech SKR Pico V1.0 controller board onboard UART mode of TMC2209 and supports Klipper firmware.
| Model Name/Number | TFT50 V3.0 |
| Part Type | 3D printer |
| Brand | Bigtreetech |
| Color | Black |
| Packaging Size | 196*100mm |
| Usage/Application | display board has higher compatibility. Users can select two work modes,they are UART serial port s |
| Printer Type | 3D printer |
TFT50 display V3.0 BIGTREETECH Color Screen.
Minimum Order Quantity: 1 Piece
| Model Name/Number | BIGTREETECH GTR V1.0 BIGTREETECH M5 V1.0 |
| Part Type | motherboard |
| Brand | Bigtreetech |
| Color | Black |
| Packaging Size | 102*76 |
| Usage/Application | 3d printer machine |
| Model Name/Number | BIGTREETECH SKR Pro v1.2 |
| Part Type | 3d printer |
| Brand | Bigtreetech |
| Color | Black |
| Packaging Size | 130*90 |
| Usage/Application | 3d printer machine |
| Printer Type | 3d printer |
BIGTREETECH SKR Pro v1.2, main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.
| Dimension | 104.99mm*47mm |
| Input Voltage | 5 |
| Warranty | No Warranty |
| Brand | bigtreetech |
| Mounting Type | screw mounted |
| Shape | Rectangle |
| Model Name/Number | CR 10 Plus |
| Part Type | Hot end assembly |
| Brand | novo3D |
| Color | Red |
| Packaging Size | 15*12*3 cm |
| Usage/Application | 3D Printer |
| Printer Type | FDM Machine |
Extruder CR10 Plus hotend KIT:
Hotend CR10 Plus Extruder kit j head remote extruder kit for 1.75mm filament nozzle 0.4mm, with long distance universal accessories set to provide choice. It is made of aluminum alloy, has excellent corrosion resistance and improves the service life of products. You may install the CR-10 J-head hotend remote extruder kit for 1.75mm filament nozzle 0.4mm by yourself. When you receive the product, it already assembled. You can just install it on the machine.
| Material | Rubber |
| Size | 110,112,122,158 |
| Brand | novo3d |
| Thickness | 1.38 |
| Usage/Application | 3d printer machine |
| Color | Black |
| Outer Measurement | 6mm |
Cooling fan turbo for 3D Printer Accessories 24V 50*15mm DC Blower Radial Cooling Fan. A device for creating a current of air or a breeze, especially: a. A machine using an electric motor to rotate thin, rigid vanes in order to move air, as for cooling. When we print a small objects or printing with a high speed the molten layer doesn’t have enough time to settle.
At the end it makes the mes out of that. By the usage of the fan they tend to radiate the heat out. This serves a higher importance in achieving the Desired shape with high degree of accuracy.Its properties Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
| Color | Transparent |
| Shape | Rectangle |
| Material | Plastic |
| Brand | novo3D |
| I Deal In | New Only |
| Assembly Required | no |
| Country of Origin | Made in India |
| Model Name/Number | Dual Extruder |
| Part Type | Hot end assembly |
| Brand | Bigtreetech |
| Color | Red |
| Usage/Application | 3D Printer |
| Printer Type | FDM Machine |
Extruder Dual Hotend kit Select high-quality Aluminum alloy 6063 material, and use refined sandblasting oxidation treatment of product shell to improve the surface texture.
| Brand | sink |
| Model Name/Number | Lj12A3-4-Z/Bx |
| Sensing Distance | 4mm |
| Material | Iron |
| Sensor Type | proximity |
| Product Type | dietection |
| Usage/Application | Metal Sensing |
| Product Type | Motor Pulley |
| Usage/Application | 3d printer parts |
| Brand | novo3ds |
| Diameter | 36mm |
| Material | aluminium |
| Color | silver |
GT2-6mm Belt Width 36 teeth 6.35mm Bore Aluminum Timing Pulley. Aluminum 36T GT2 timing pulley has high quality shiny surface appearance and robust construction, longer working life. he rounded teeth of this tooth and belt are engaged together longer providing a smoother transition between teeth, good performance for 3D printers. Applications include 3D printer, CNC and other robotics with timing belt pulley, GT2 timing belt pulley system especially suited for linear movement and positioning.
Features of GT2-6mm Belt:
| Brand | novo3D |
| Software Supporting | CURA/Repetier Host |
| Display | MKS TFT 24 |
| Weight | 7.6Kg |
| Nozzle Diameter | 0.4MM |
| Input File Type | G CODE |
| Working Mode | Online or SD Offline |
| Size | 480x400x400 mm(Product) |
| Print Size | 220x220x250 mm |
| Print Speed | 100MM/S |
| Extrusion Head Temperature | 260 Degree C |
| Print Material Diameter | 1.75MM |
| Printing Material | PLA,AMS,HIPS |
| LAYER THICKNESS PRECISION | 0.1-0.3MM |
| Z Positonal Accurcay | 0.004MM |
| Support Software | CURA/REPETIER HOST |
| Hot BedTemprature | 100Degree C |
| Brand | novo3D |
| Material | POM |
| Color | White |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
| Country of Origin | Made in India |
v wheel 3d printer POM for Aluminium profile. The wheel is made up of delrin which is a type of POM. V wheel available with different types of bearing, Materials are are used in high-performance engineering components such as small gear wheels, eyeglass frames, ball bearings, ski bindings, fasteners, guns, knife handles, and lock systems. Further, it has several purposes for different applications. Major applications are as follows: 3D Printers structure uses v slot profile so the normal nuts will get loosen due to vibration and friction, apparently the lock nut holds the wheel tightly. Hence, It is provided with the lock nut.
v wheel 3d printer Application:
| Number Of Pieces | 5 |
| Brand | novo3D |
| Material | Mild Steel |
| Color | Black |
| Quantity Per Pack | 1 set |
| Country of Origin | Made in India |
A GL-12 830 Points Solderless Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.
Parts will not be damaged so they will be available for re-use afterward. 830 Tie points 128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components - No soldering required - Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter - Standard 2.54mm hole spacing Adhesive sheet on the back side of the board - Multiple breadboards can be spliced together too.
You just plug-in vertically your components in the position you want without soldering. The board will accept up, clock-clips and the smaller DIPs. Each unit will accept transistors, diodes, LEDs, resistors, capacitors, pots and virtually all types of components.The units are desired to use #22-30 solid hookup wire foe interconnection will plug-in ease. It could be combined with a series features, a unique interlocking design desired. It manages without tools to meet changing requirements and components are re-useful.
Breadboard GL Features:
| Power | 40 W |
| Temperature | 250 Degree Celsius |
| Voltage | 24V/12v |
| Color | Red |
| Weight | 171g |
| Cartridge Material | Stainless steel (304) |
| Diameter | 6mm / 0.24in |
| Barrel Length | 20mm / 0.79in |
| Wire Length | 1m/ 39.37in |
| Barrel Diameter | 6mm / 0.24in |
Cartridge heater 40W Extrusion heater features specially designed for heating applications that require High heat transfer, stainless steel heater is corrosion resistant. Stainless steel are the high corrosion resistive material. Due to the high corrosion Heat resistive wires are widely used in the heater to withstand the temperature. Metallic resistance heating elements may be wire or ribbon, straight or coiled.
The Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater. Increase the reliability of your extruder with this heater cartridge. Also, it heats up faster. It fits nicely in our extruder, so its an easy replacement. Get your hot end hot quickly and hit the highest of temperatures. Comes with a meter of silicone insulated high-temperature wire. It consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core. The choice of coils varies depending at the power, and provide an excellent uniform distribution of heat, which considerably increases the long life of the heater in addition to prevents the oxidation of the heater wire even at high temperatures.
| Material | Brass |
| Color | Brass |
| Thread Size | M8 |
| I Deal In | New Only |
| Brand | novo3D |
| Country of Origin | Made in India |
Leadscrew nut 1 start advantages and disadvantages:
Applications:
| Material | MILD STEEL |
| Shape | Round |
| Size | M5 |
| Surface Finish | Electroplated |
| Brand | NOVO3D |
| Color | Silver |
| Capacity | 100000 |
| Diameter | 7.5 |
| Thickness | 1 |
| I Deal In | New Only |
| Country of Origin | Made in India |
Precision M5 Flat Sim washer shows slight corrosion (rust spotting) when left in water for a period of time or when water dries out on them. The blow starts with a high – oxygen gas mixture of, for instance, 80 percent oxygen and 20 percent argon, because there is still plenty of carbon in Mild Steel Flat Washers with which oxygen prefers to combine. Chromium in Carbon Steel Lock Washers also induces ferromagnetism in steel which is not desired in some of the applications, where nickel also helps in countering this problem.
Elements in Carbon Steel Slot Washers have a strong influence on heat – treating; because they tend to slow the diffusion of atoms through the iron lattices and thereby delays the allotropic transformations. Improved harden-ability in Mils Steel Steel Machine Washers is achieved by adding such elements as manganese, molybdenum, chromium, nickel, and boron.
Minimum Order Quantity: 100 Piece
| Brand | novo3D |
| Size | M3 |
| Industry | Automotive |
| Material | Stainless Steel |
| Surface Finishing | Polished |
| Usage/Application | Used in 3D Printer |
| Type | Sliding Nut |
| Mode of Action | Locking |
| Type of | T nut |
Hammernut 20 Series for aluminium profile 2020, 2040, 4040, etc., which is also called as Sliding T Nut , Tee-nut,Drop In Nut, etc. Usage 3D Printer Parts Tee nuts for building machine V-Slot M5 Tee Nut, Size T 1.6*10*15. A T-slot nut is used with a threaded clamp to position and secure pieces being worked on in a workshop. The T-slot nut slides along a T-slot track, which is set in workbench or table for a router, drill press, or band saw.