Call 07942545947 90% Response Rate
Send Email
Product Brochure
| Model Name/Number | NEMA 17 |
| Part Type | Stepper motor |
| Brand | nema 17 |
| Color | Black |
| Usage/Application | 3d printer machine |
| Printer Type | fdm |
Minimum Order Quantity: 10 Piece
Product Brochure
| Brand | Novo3D |
| Usage/Application | Electronics |
| Mounting Type | Plug |
| Part Number | TMC2209 |
| Current | 2.8A |
| Country of Origin | Made in India |
Additional Information:
Product Brochure
| Blower Type | Wing |
| Type | Air Cooling Fan |
| Color | Black |
| Material | Plastic |
| Voltage | 12V/24V |
| Size | 60x60x15mm |
| Usage/Application | Cooling fan |
| Power | DC |
| Electric Current Type | DC |
| Blade Material | Plastic |
| Mounting | Duct Fan |
| Power Source | Electric |
| Air Volume | 3500rpm |
| Product Type | Duct Mounted Fan |
Cooling fan 6015 DC 12V/24 V Cooler 60 x 60 x 15 mm Small Exhaust Fan for 3D Printer.
Our 60mm cooling fan models prove this point effectively. With models available that have a top speed of over 20,000 rpm, you can generate more airflow with a small diameter fan. We also have extremely quiet 60mm fans as low as 4500 rpm’s that will provide the cooling you need with minimal noise.
Cooling fan advantages:
| Brand | novo3D |
| Input Voltage | 8.2 - 45 V |
| Model Name/Number | DRV8825 |
| Usage/Application | 3D Printer |
| Color | Pink |
| With Heat Sink | yes |
| Brand | BIGTREETECH |
| Output Current | 4.75-29V DC |
| Input Voltage | 2A |
| Model Name/Number | TMC 2226 |
| Usage/Application | Industrial |
| Peak Current | 2.8A |
| Brand | novo3d |
| Output Current | 4.0A |
| Input Phase | Three Phase |
| Input Voltage | 9V-42V |
| Model Name/Number | TB660-4A |
| Usage/Application | Industrial |
| Part Type | Motor Splitter |
| Brand | Bigtreetech |
| Color | Black |
| Usage/Application | 3D Printer |
| Suitable for | Z axis |
| No. of drivers to drive | 1 |
| Voltage | 24V |
| Brand | Nova |
| Input Phase | Single Phase |
| Usage/Application | Industrial |
| Digital Control | Yes |
| Packaging Type | Box |
| Country of Origin | Made in India |
| Type | Unipolar Stepper Motor |
| Number of Phase | 1 |
| Voltage | 240 V |
| Brand | Nema 17 |
| Product Type | Stepper Motor |
| Country of Origin | Made in India |
Product Brochure
| No Of Phase | 2 |
| Step Angle | 1.8 Degree |
| Model Name/Number | nema 23 |
| Brand | novo3d |
| Voltage | 8.4 |
| Motor Type | stepper motor |
| Torque | 35kgcm |
| Input Phase | Single Phase |
| Model Name/Number | TMC2209 V1.0 |
| Weight | +-2g |
| Voltage | 3V to 5V |
| Dimension | 15 x 20mm |
| Driveable Current | 2A |
| Subdivision | 1, 1/2, 1/4, 1/8, 1/16 |
| Native Microsteps | Up to 1/16 |
| Motor Supply Voltage (VM) | 4.75V to 29V |
| MicroPlyer Microsteps | Up to 1/256 |
| Rated Motor Phase Current | 1.7A RMS | 2.5A Peak |
function and advantages
Product Brochure
| Model Name/Number | MKS GEN V1.4 |
| Industry | Automotive |
| Usage/Application | 3D Printer |
| Connectivity | USB/SDcard |
| File Format Supported | GCODE |
| I Deal In | New Only |
MKS Gen is a feature rich all-in-one electronics solution for Reprap and other CNC devices.
It features an onboard ATmega2560. Its five motor outputs are powered by Pololu pin compatible stepper drivers.
The board features a developer friendly expansion port supporting giving access the same as Ramps1.4.
MKS Gen is designed to be flexible in the users power source availability, allowing any power supply from 12V-24V.
MKS Gen retains all interface of ramps1.4.
Features
Minimum Order Quantity: 1 Piece
Product Brochure
| Model Name/Number | BIGTREETECH Octopus V1.0 motherboard |
| Part Type | motherboard |
| Brand | Bigtreetech |
| Color | Black |
| Packaging Size | 130*90 |
| Usage/Application | 3d printer machine |
| Printer Type | fdm |
BIGTREETECH Octopus V1.0 is a very powerful motherboard with 8 stepper driver support, so this motherboard can control up to 8 different axes. This feature is especially suitable for multi-colour printing and tool changers, for the use of different tools / modules such as different 3D print heads, laser engraving, laser cutting, etc. All fantasies and modifications can be realised.
Product Brochure
| Brand | novo3D |
| Color | Green |
| Usage/Application | 3D Printer |
| Dimension | 2cm*1.5cm |
| I Deal In | New Only |
| Current | 2A |
A4988 driver is a complete micro-stepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16. Step modes operate bipolar stepper motors. output drive capacity of up to 35 V and +- 2 A. It includes a fixed off-time current regulator. the regulator in slow or mixed decay modes. Its converter is the key to the easy implementation.
A4988 driver Features:
Product Brochure
| Brand | novo3D |
| Material | ceramic |
| Color | White |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
| Country of Origin | Made in India |
Product Brochure
| Brand | BIQU |
| Part Type | Printer Part |
| Size | 14 x 13 x 3.6 mm |
| Weight | 169 g |
| MPU | ARM Cortex-M3 CPU |
| Main Control Chip | LPC1768 |
| Input Voltage | DC12V-DC24V |
BIGTREETECH SKR V1.4 smoothie board 32 Bit for 3D Printer. Using the 32 bit main frequency 100 MHz arm level cortex M3-series, LPC1768 main control chip the performance has improved. It is equipped with highly modular and open source firmware marlin 2.0 which is very convenient for users
Product Brochure
| Model Name/Number | CR 10 |
| Brand | Creality |
| Industry | Automotive |
| Material | Aluminum |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
Extruder CR10 hotend j head remote extruder kit for 1.75mm filament nozzle 0.4mm, with long distance universal accessories set to provide choice. It is made of aluminum alloy, has excellent corrosion resistance and improves the service life of products. You may install the CR-10 J-head hotend remote extruder kit for 1.75mm filament nozzle 0.4mm by yourself. When you receive the product, it already assembled. You can just install it on the machine.
Extruder CR10 hotend KIT Features:
Packing List:
Product Brochure
| Part Type | Filament Detection Module |
| Brand | Bigtreetech |
| Color | Black |
| Usage/Application | 3D Printer |
| Applicable filament diameter | 1.75mm |
| Cable Length | 1m |
Product Brochure
| Model Name/Number | LCD 12864 |
| Brand | novo3D |
| Industry | Automotive |
| Color | RED |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS board using "smart adapter" included.
This panel connect your RAMPS board, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.
Product Brochure
| Model Name/Number | LCD 2004 |
| Brand | novo3D |
| Industry | Automotive |
| Color | red |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
Product Brochure
| Input Voltage | DC12V-DC24V |
| Package Dimensions | 150x150x15 mm |
| Weight | 300G |
| Thickness | 15 |
| Shape | Rectangle |
| Power | 24C32 32-Kbit |
SKR 3 Motherboard 32Bit Board Upgrade for 3D Printer Machine
The BIGTREETECH SKR 3 motherboard is a 32-bit 3D printer motherboard designed and manufactured by the 3D printing team of Shenzhen BIQU Technology Co., Ltd. It is a successor to the SKR 2, SKR1.4 and SKR1.4 Turbo series of motherboards and adds many features. Added multiple functions to greatly protect the motherboard, rich expansion interface.
Specifications of SKR 3 :
Minimum Order Quantity: 1 Piece
Product Brochure
| Part Type | Cartridge |
| Quality | OEM (Original Equipment Manufacturer) parts |
| temperature | 360 Degree |
| volt | 24 v |
| watt | 50 w |
| Country of Origin | Made in India |
Additional Information:
| Brand | Bigtreetech |
| Usage/Application | 3D Printer |
| Switch Type | Micro Limit Switch |
| Number Of Switch Positions | Vertical |
| Material | Plastic |
| Size | 20x27mm |
| Brand | Bigtreetech |
| Usage/Application | 3D Printer |
| Switch Type | Micro Limit Switch |
| Number Of Switch Positions | Horizontal |
| Material | Plastic |
| size | 20x27mm |
| Industry | Automotive |
| Material | Aluminum |
| Color | Black |
| Usage/Application | 3D Printer |
| Printing Size | 220x220mm |
| I Deal In | New Only |
Heat bed 12V/24V Parts for Rep rap Hot Bed 3D Printers Part 220*220mm Aluminium Plate 3mm bed. Ordinary MK3 only is about 130W, and only about 80 degrees temperature. This thermal bed power boost to 200W. It can be easily up to temperatures above 110 degrees; It has 4 holes very close to the four corners of positioning.
Besides, the heat bed is easily to break during transportation. And it is difficult to handle. This improved version, in four positioning holes remain unchanged, and the size is 220 * 220. the positioning hole from the four corners of the increased distance, and made a fillet. So it is not difficult to handle and not easy to break for the angle. It can be used with 12V and as well as 24V.
Heat Bed Description:
| Brand | novo3D |
| Color | Black |
| Usage/Application | 3D Printer |
| Weight | 0.025 g |
| Dimension | 33 x 20 x 10 mm |
| I Deal In | New Only |
| Masking Color | white |
| Board Thickness | 8mm |
| Brand | GL |
| No.of Tie Points | 830 |
| size | 175*67*8mm |
| Country of Origin | Made in India |
A GL-12 830 Points Solderless Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.
Parts will not be damaged so they will be available for re-use afterward. 830 Tie points - 128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components No soldering required Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter Standard 2.54mm hole spacing Adhesive sheet on the back side of the board Multiple breadboards can be spliced together too.
You just plug-in vertically your components in the position you want without soldering. The board will accept up, clock-clips and the smaller DIPs. Each unit will accept transistors, diodes, LEDs, resistors, capacitors, pots and virtually all types of components.The units are desired to use #22-30 solid hookup wire foe interconnection will plug-in ease. It could be combined with a series features, a unique interlocking design desired. It manages without tools to meet changing requirements and components are re-useful.
Breadboard GL Features:
| Model Name/Number | heat bed sheet |
| Part Type | heat bed sheet |
| Brand | Bigtreetech |
| Color | Black |
| Packaging Size | 240*240*15 |
| Usage/Application | 3d printer machine |
| Printer Type | fdm |
| Model Name/Number | cnc extension sheild |
| Brand | novo3D |
| Digital I/O Pin | 2 |
| Voltage | 7.5-12V |
| Current | 2A |
| Connecting Wire | 4 nos |
It can be used as driver expansion board for engraving machines and 3D printers. It has in total 4 channel slots for stepper motor driver modules for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.
Specification:
1. 3 axis stepper motor driver
2. Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
3. 2A can be controlled within the two-phase four-wire stepper motor.
4. Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
5. Released the I2C interface, you can connect to the LCD I2C or other I2C module.
6. Power DC5V interface, 7.5-12V voltage input.
7. GRBL compatible
8. Worked with motherboards like arduino nano, etc.
| Model Name/Number | Ramps 1.4 plus |
| Brand | BIGTREETECH |
| Industry | Automotive |
| Color | Black |
| Usage/Application | 3D Printer |
| I Deal In | New Only |
1. Ramps 1.6 plus is mainly a new adapter ramps board for the upgrade of the old Ramps 1.6 driver using the SPI working mode wiring complex problem.
2.The Ramps 1.6 plus uses the SPI mode of operation, which can be achieved simply by plugging and unplugging the jumper cap. It not only saves the complicated wiring process, but also saves the cost of external wiring, which is economical and practical.
3.The new ramps 1.6 plus effectively avoids the problem of the motor not working by inserting the wrong line; It also avoids the problem that the drive does not work due to poor contact of the external line during the printing process.
SPI working model :
Advantage:
1. The PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes.
2. The parts of power and heat bed using the 30A high current terminal ,which can largely avoid the burning terminal situations.
3. It is more clear to connect the wire after update a new top overlay and bottom overlay .
4.Adding the reset expansion interface. It is convenient for users to extend the reset button.
5. X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board can use for more type machine .
6, Using a combination of color pin and row connector , effectively distinguishing each function interface, beautiful and practical.
| Brand | BIGTREETECH |
| Usage/Application | 3D Printer |
| Connectivity | USB/SDcard |
| I Deal In | New Only |
| Appearance size | 100.75*70.25mm |
| Input voltage | DC 12/24V |
SKR MINI E3 V2.0 Control Board 32 Bit specially tailored for ender3 printers, perfectly replacing the original ender3 printer motherboard. It has added additional hardware improvements and enhancements on based on community feedback. Among other things, these improvements and enhancements with SKR Mini E3 V2.0.x include two Z-axis interface ports, and SKRMiniE3 V2.0.x is today, in addition to the 3D-printers already support by the V1.x boards, also compatible with CR-10S, CR-10 S4, CR-10 S5, Ender 5, Ender 5 Pro, and Ender 5 Plus from Creality.
SKR MINI E3 V2.0 features:
Package includes:
| Part Type | Adapter Board |
| Brand | Bigtreetech |
| Color | Black |
| Usage/Application | 3D Printer |
| Compatible with: | Ender 3, Ender 3 Pro, Ender 5, CR-10 Mini, CR-10 |
| Incompatible with: | ANet A8, Ender 2, Ender 4, CR-8 |
This is Improved design with wider power channels With this adapter, no wires need to be cut!! Simply connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware.
| Industry | Automotive |
| Material | PCB |
| Color | Black |
| Usage/Application | 3D Printer |
| Heated Bed | 214mmx214mm |
| I Deal In | New Only |
Heat bed PCB Features:
| Electric Current Type | DC |
| Power | 24 |
| Usage/Application | 3D printer parts |
| Material | Plastic |
| Brand | novo3d |
| Impeller Size | 50mm*50mm*15mm |
Cooling fan turbo for 3D Printer Accessories 24V 50*15mm DC Blower Radial Cooling Fan. A device for creating a current of air or a breeze, especially: a. A machine using an electric motor to rotate thin, rigid vanes in order to move air, as for cooling. When we print a small objects or printing with a high speed the molten layer doesn’t have enough time to settle.
At the end it makes the mes out of that. By the usage of the fan they tend to radiate the heat out. This serves a higher importance in achieving the Desired shape with high degree of accuracy.Its properties Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
| Model Name/Number | Arduino Mega 2560 |
| Brand | novo3D |
| Digital I/O Pin | 54 |
| Analog Input pin | 16 |
| Connection | USB |
| UARTS | 4 |
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila
| Type | Air Cooling Fan |
| Voltage | 12 v and 24v |
| Size | 30x30x10 |
| Usage/Application | 3d printer parts |
| Color | Black |
| Material | Plastic |
E3D V6 fan duct housing guard for j-head Hotend cooling fan cover + 3010 Cooling Fan 12V/ 24V for 3D Printers is Injection-molded radiator cooling fan cover + 3010 Cooling Fan for 3D Printers. The elastic polymer temperature resistant material is easy to load and unload, and it is not easy to damage. (directly put the fan cover on the radiator, gently press can complete the installation). The inner wall with a card mark can better hold the radiator.
Specifications E3D V6 fan duct:
Product Brochure
| Brand | Bigtreetech |
| Part Type | Printer Part |
| Color | Black |
| Display Type | Digital |
| Size | 110*58MM (Appearance) |
| Screen Type | 12864 LCD |
| Model Name/Number | TFT 35 V3.0 |
| Power Input | DC5V |
| SD Card And U Disk | Support touch screen mode |
| Microprocessor | STM32F207VCT6 |
| Working Mode | Touch screen mode,12864 LCD mode |
| SD Card Logic Voltage | 3.3V or 5V,support MEGA2560 motherboard,with higher compatibility |
Minimum Order Quantity: 1 Piece
Product Brochure
| Usage/Application | 3D Printer, Automation Units |
| Switch Type | Micro Limit Switch |
| Rated Voltage | 300V |
| Current Rating | 2A |
| Size | Approx. 40 x 15 x 10mm/ 1.57" x 0.59" x 0.39" |
| Type | Logic ICs |
| Length of Cable | approx. 70cm/ 27.56" |
Other Details:
Package Includes:
Minimum Order Quantity: 1 Piece
Product Brochure
| Weight | 130 g |
| Master Controller | ARM Cortex-M3 Series |
| Touch screen mode | Supports SD card and U Disk Printing |
| LCD display mode | 12864 Smart 12864 Smart controller |
| Item Type | Display |
| Installation Size | 100.08 x 41.15mm |
| Dimensions | 176 x 92 x 50 mm(Product) |
| working modes | UART Serial Port Touch Screen and 12864 LCD |
| Screen Model Number | BIGTREETECH TFT 24 |
| Power input | 5V |
| Screen interface | EXP1,EXP2,Serial 12864 display interface |
| Microprocessor | STM32F105RCT6 |
Other Details:
Advantages:
| Voltage | DC 24V |
| Size | 40x40x10mm |
| Color | Black |
| Power Source | Electric |
| Material | Plastic |
| Current | 0.1Amp+-10% |
| Noise Level | <18dBA+-10% |
| Line Length | 30 cm/11.8 inch |
| Rated Current | 0.1Amp 10% |
| Service life | 30000 hours |
| Air flow | 10.5 CFM |
| Bearing | Oil bearing |
| Rated Speed | 3500RPM |
Cooling fan DC 24 V Cooler 40 x 40 x 10 mm Small Exhaust Fan for 3D Printer. When we print a small ojects or printing with a high speed the molten layer doesnt have enough time to settle. At the end it makes the mes out of that. By the usage of the fan they tend to radiate the heat out. This serves a higher importance in achieving the Desired shape with high degree of accuracy.
Cooling fan advantages:View More